Throttling natural gas
Let natural gas down through a valve and see it cool. A first case that covers components, the fluid package, a feed stream and one operation.
About 10 minutes. Skills: components, fluid package, feed stream, valve. In the app: Start page › Exercises › Throttling natural gas.
1. Start a new case
On the Start page, tap New case. You arrive in the Properties environment, where every simulation begins.
2. Set up the fluid
- In the component library, search for and add Methane, Ethane, Propane and n-Butane. (Or tap the Natural gas quick-add and remove the components you do not need.)
- Under Fluid Packages, keep Peng-Robinson.
- Tap Simulation at the bottom right to enter the Simulation environment.
3. Add the feed stream
- Open the palette (the Object palette button in the PFD toolbar), choose Material Stream and tap the PFD to place it.
- In its view, enter on the Conditions page:
- Temperature 60 °F
- Pressure 600 psia
- Molar Flow 100 lbmole/hr
- On the Composition page tap Edit… and enter mole fractions: Methane 0.85, Ethane 0.08, Propane 0.05, n-Butane 0.02. Tap OK.
Values in blue are yours. If your unit set shows other units, pick °F, psia or lbmole/hr on the keypad's unit row. The stream turns solved (status OK) when temperature, pressure, flow and composition are all known.
4. Add a valve
Place a Valve from the palette. On its Connections page, pick your feed as the Inlet and choose << New Stream >> for the Outlet.
You can also select the valve and drag from its outlet port handle onto empty PFD space to create and connect a new stream.
5. Set the outlet pressure
Open the valve's outlet stream (or the valve's Worksheet tab) and enter a pressure of 200 psia. The solver runs on its own and the valve turns solved.
Instead, you could enter a Delta P of 400 psi on the valve's Parameters page. Either one fixes the outlet pressure.
6. Read the result
Question: open the valve outlet stream. What is its temperature?
Gas cools as it expands through a valve with no heat added or removed: the enthalpy stays the same and the temperature falls. The exercise accepts your answer if it is within about 1 °F of your case's value.
Try next
- Change the outlet pressure to 100 psia and predict the new temperature before the solver answers.
- Turn on Show T and P on streams in the PFD toolbar to see both streams' conditions at a glance.
- Continue with Flashing a cold feed.